When the vents blow weakly or not at all, the indoor air handler is a prime suspect. A worn blower motor, a failed capacitor in the unit, a dirty blower wheel or a bad control board can each be the cause, and a technician can sort out which. Call the number on this page to be connected with a local AC company in Argyle.

Is it the thermostat, the filter or the unit?
- Check that the thermostat is set to cool and the fan is on auto
- Look at the filter for heavy dirt
- See whether the breaker is on, without opening the panel
- Look for water near the air handler
If none of these help, call.
Installation issues
Sometimes the cause traces back to the original setup: the wrong blower speed setting, a poorly sized duct system or an air handler mismatched to the outdoor unit. A technician who looks at the whole system can spot those patterns.
The fix may be an adjustment, not a part.
Rural homes in this part of Denton County sometimes have older equipment and well-sealed attics with limited access. A technician may ask for photos or model numbers up front to bring the right parts.
Useful local contacts for Argyle
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Anyone who opens a refrigerant circuit has to be EPA Section 608 certified, and venting refrigerant is not allowed, so leak work and recharges belong with a certified technician.
Argyle Permits Department is the office for building and mechanical permits in Argyle; ask the contractor whether your job needs one.
Oncor delivers electricity in Argyle and handles outages at 888-313-4747; your bill and plan come from whichever retail provider you signed with.
Nearby, the same kind of help is available in Fort Worth, Northlake and Justin.
Motor vs. board vs. wheel
| Repair | What shapes the cost |
|---|---|
| Blower motor | Size, type and brand |
| Control board | Model-specific parts |
| Blower wheel | Cleaning or replacing |
Ask for the details in writing.
Prices vary with the unit, so ask the AC company to explain what each line of the quote covers and whether the part is new, matched to your model and installed with the proper settings.
After the repair
Ask the technician to confirm that air comes out strongly at the vents, the unit runs quietly and the cabinet is sealed again. Ask to see any removed part, and whether the filter size and type are right for your unit.
It gives you a clear picture of the unit's condition.
Know your equipment
Write down the model and serial number from the air handler's label and note where it sits. The information speeds up the first call and helps the AC company bring the right motor, wheel or board for your system.
Keep a copy with your records for the next repair.
Air Handler & Blower Repair questions in Argyle
Where is my air handler located?
What is the control board in an air handler?
Is the air handler the same as the furnace?
Can a company reach a detached shop unit?
More AC and heating services in Argyle
Air Handler & Blower Repair nearby
Helpful guides
Sources
Last updated: