AC and heating referrals for Fort Worth & nearby townsCall: (817) 623-4802
(817) 623-4802

Ductless Mini-Splits in Arlington, TX

acrepairfortworth.net

This free referral line connects Arlington homeowners with independent companies that install and service ductless systems.

Room that never cools in Arlington?
Call now to be connected with a local AC and heating company in Arlington.
(817) 623-4802

Ductless systems can serve a single space or several, with one outdoor unit feeding multiple indoor heads. They suit homes with no duct space or with rooms the central AC misses. Call the number on this page to be connected with a local AC company in Arlington.

Wall-mounted ductless mini-split head in a room, ductless mini-splits in Arlington, TX

Converted rooms and bonus spaces

Finished attics, enclosed porches and converted bedrooms are common problem spots. They sit at the end of a duct run or have none at all. A wall head and a short line set can bring them in line with the rest of the house. Bring up any room that is also hard to heat in winter, since most heads do both.

Heating with a mini-split

Most mini-splits are heat pumps, so the same system cools in summer and heats in winter. In a mild winter climate that is often enough for a garage, bonus room or addition. For very cold nights, ask about the unit's cold-weather ratings. Ask the installer how the system behaves on the coldest nights and what backup, if any, is available.

Call now to be connected with a local AC and heating company in Arlington.
(817) 623-4802

Sizing each room

A head sized for a small bedroom is too small for a great room. Sun exposure, ceiling height, insulation and glass area all change the number. Good designers calculate each space, then choose indoor heads to match instead of using one standard size. Rooms with tall ceilings, big glass or an afternoon sun load usually need a larger head.

Before work starts in Arlington

Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.

Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.

If the job is a full replacement, expect a mechanical permit through Arlington's Planning & Development Services. Ask who pulls it and when the inspection happens.

Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.

Companies that take calls here usually also work in Fort Worth, Kennedale and Forest Hill.

Electrical considerations

A mini-split needs its own circuit and usually an outdoor disconnect. If the panel is full or old, an upgrade may be needed. Ask the company to check the panel early so electrical work does not surprise you later. Panels in older homes are the most common source of surprises, so it helps to have it checked early.

Living with a mini-split

Set the remote and leave it. Heavy setbacks make it work harder, and the best comfort comes from steady settings. Keep furniture and curtains from blocking the head, and clean the filter monthly during the cooling season. Doing this small routine all season keeps the unit running well into fall.

Arlington at a glance

Calls come in from across Arlington, including around Downtown Arlington, East Arlington, Entertainment District.

About 38% of Arlington's housing units were built before 1980 and roughly 21% were built in the 1970s alone, so a large share of homes are 40 or more years old.

Ductless Mini-Splits questions in Arlington

Do mini-splits need ductwork?
No. An outdoor unit connects to indoor heads through a small line set that passes through the wall, so no ducts are needed.
Are mini-splits noisy?
Indoor heads are generally quiet. Outdoor units hum like any other condenser. Variable-speed models tend to be quieter than older single-speed units.
Where should the indoor head be placed?
High on a wall where air can reach the room without blowing directly on seating or beds. The installer should discuss placement with you before drilling.
Does a mini-split need a permit?
Most installs need a permit for the electrical and mechanical work. A reputable company will pull it and schedule any inspection.

More AC and heating services in Arlington

Ductless Mini-Splits nearby

Call now to be connected with a local AC and heating company in Arlington.
(817) 623-4802

Last updated:

☎ Call (817) 623-4802