If the thermostat screen is blank, the batteries may be dead or the unit may have lost power from the system. If it works but the AC does not respond, the problem may be the wiring, a tripped safety switch or the equipment itself. Call the number on this page to be connected with a local AC company in Arlington.

Quick checks you can do safely
- Set the thermostat to cool and lower the temperature below the room reading
- Replace the batteries if it uses them
- Check that the fan setting is on auto
- Look at the filter and the breaker for the air handler
Power and safety switches
Some systems cut power to the thermostat or the equipment through a float switch or a blown low-voltage fuse. When that happens the thermostat may go blank. Finding the cause matters, because a tripped switch is a sign of a drain problem or an electrical fault.
Getting a clear quote
The quote should say which thermostat, what wiring work is needed and what setup is included. Compare two or three if the job is larger than a simple swap. A very low price with vague wording may leave setup and wiring as extras.
Before work starts in Arlington
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Federal rules require EPA 608 certification for technicians who service equipment containing refrigerant, which covers most AC repairs beyond filters and breakers.
For Arlington addresses, Arlington's Planning & Development Services handles mechanical permits; a system change-out is permitted work, and the contractor normally pulls the permit.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Companies that take calls here usually also work in Fort Worth, Kennedale and Forest Hill.
Before the visit
Note the current thermostat model if you can, and any problems you have seen, such as blank screens or wrong readings. If you bought a new thermostat, have it ready. Clear the area around the thermostat and the air handler so the work goes smoothly.
Heat pump thermostats
Heat pumps need a thermostat that handles their modes and often auxiliary heat. Using the wrong type can cause odd behavior in winter. If your home has a heat pump, tell the company so it can match the thermostat and settings to the equipment.
More about Arlington
Calls come in from across Arlington, including around Downtown Arlington, East Arlington, Entertainment District.
About 38% of Arlington's housing units were built before 1980 and roughly 21% were built in the 1970s alone, so a large share of homes are 40 or more years old.
Thermostat Repair & Installation questions in Arlington
How long does a thermostat install take?
What should I do if the thermostat is on but the AC will not start?
Why does my AC short-cycle?
Why is my thermostat screen blank?
More AC and heating services in Arlington
Thermostat Repair & Installation nearby
Helpful guides
Sources
Last updated: