A furnace that runs but will not heat is most often held up by a worn ignitor, a dirty flame sensor or a safety switch that keeps tripping. A technician can test each part in a single visit. Call the number on this page to be connected with a local heating company in Burleson.

Signs your furnace needs repair
The common signs are no heat at all, warm air that turns cool partway through a cycle, a furnace that starts and stops every few minutes, and clicking with no flame. Weak airflow and a pilot or burner that never catches also count. If the thermostat is set to heat and the house still drops, it is time to call.
The parts that fail most often
Four small parts cause most no-heat calls: the hot surface ignitor, the flame sensor, the pressure switch and the limit switch. Each one protects the furnace or starts the burn, so when any of them misbehaves the whole sequence stops. They are inexpensive parts compared with the furnace itself, though labor and access vary.
When a repair stops making sense
If the furnace is near the end of its life and the failed part is expensive, spending on the repair can be a poor trade. The tech's answer to a simple question helps: if this part is fixed, what is likely to go next? Treat that as input, not pressure, and take your time deciding.
Who handles what in Burleson
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Smell gas near the furnace? Get everyone out, call 911 and then Atmos Energy (866-322-8667) once you're outside. Don't flip switches on the way.
Burleson's Building Permits and Inspections department requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Burleson is in Oncor's delivery area: Oncor maintains the lines and restores outages (888-313-4747), while you buy power from the retail electric provider you chose.
Nearby, the same kind of help is available in Fort Worth, Crowley and Joshua.
What to tell the dispatcher
Mention whether the furnace clicks, lights then quits or does nothing, and whether any light is blinking on the control board. Say whether it is in an attic, a closet or the garage. Those few details help the company send someone with the right parts and plan for access.
A yellow flame is worth a call
A healthy gas burner flame is mostly blue. Lazy yellow or orange flames, soot around the burner area or a flame that lifts off the burners can mean poor combustion. Do not keep running a furnace that shows these signs. Turn it off at the thermostat and call a heating company.
Furnace Repair questions in Burleson
Why does my furnace keep shutting off after a few minutes?
What should I do if I smell gas near the furnace?
How often should a furnace be serviced?
Will a furnace repair fix my high heating bills?
More AC and heating services in Burleson
Furnace Repair nearby
Sources
Last updated: