Not cooling can mean no cold air at all, air that is only slightly cool, or a system that cools one room and ignores another, and each points to a different cause. Matching your symptom to the list on this page narrows the search. Call the number on this page to be connected with a local AC company in Hurst.

Fan on versus auto
| Fan setting | What you will feel |
|---|---|
| Auto | Air only while cooling runs |
| On | Air all the time, including warm air between cycles |
Leaving the fan on can make a working AC feel like it is blowing warm air, especially in a hot Hurst afternoon when the attic is baking.
The blower is only half the story
If you can hear the air handler and feel air at the vents, the blower is working, and the question becomes whether that air is cold. If you hear nothing, check the thermostat and breaker. A silent blower with power can mean a failed motor or capacitor, which is a repair, not a setting.
Houses from the 1970s, common around Hurst, may still have older systems, so ask the technician how the refrigerant and coil condition affect the repair choice.
Do not chip the ice
It is tempting to scrape ice off the coil or the line, but the fins and tubing are delicate, and a puncture turns a no-cool call into a refrigerant leak. Let it melt on its own with the fan running. Tell the company you saw ice and how long it took to appear.
Who handles what in Hurst
The Texas Department of Licensing and Regulation issues ACR contractor licenses. A quick license lookup on TDLR's site is worth doing before you sign a proposal.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
Hurst's Building Inspections office requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Hurst is in Oncor's delivery area: Oncor maintains the lines and restores outages (888-313-4747), while you buy power from the retail electric provider you chose.
Companies that take calls here usually also work in Fort Worth, Bedford and North Richland Hills.
A breaker that will not stay on
A breaker that trips once may just be a surge. One that trips again as soon as the AC starts is warning of a short, a failing compressor or a motor drawing too much current. Do not keep resetting it. Leave it off and call, because repeated resets can damage equipment and are a safety concern.
Where homeowner checks end
In Hurst, as anywhere, settings, filter, vents, a thawed coil and one breaker reset are fair game. Opening panels, touching wiring, handling refrigerant lines or adding charge are not. When the checks above leave you stuck, you have done the useful part: your notes will help the technician reach a diagnosis faster.
Hurst at a glance
Calls come in from across Hurst, including around Valentine Oaks, Chisolm Park, North East Mall.
The median Hurst home was built in 1973, so original-era ductwork and equipment replacement are common.
AC Not Cooling questions in Hurst
My AC blows warm air but the outdoor unit is running. Why?
Should I add refrigerant myself?
How do I check an AC company's credentials?
Why do older houses lose cooling in some rooms?
More AC and heating services in Hurst
AC Not Cooling nearby
Helpful guides
Sources
Last updated: