Mini-splits heat and cool a room without ductwork, using an outdoor unit and a wall-mounted indoor head. They are common for garages, bonus rooms, sunrooms and add-ons. Call the number on this page to be connected with a local AC company in Hurst.

Spaces mini-splits fit less well
For a house with sound ducts and a typical layout, a central system is usually simpler to maintain. Mini-splits can cover a whole home, but they involve several indoor heads. A good company will tell you honestly when central is the better fit. Getting a second opinion on central versus ductless is normal and often useful.
Condensate drains on a mini-split
Every indoor head makes water as it cools. The drain line has to slope correctly or use a small pump so it does not back up inside the wall. A neat drain run is a sign of careful installation and prevents stains and mold. A short, sloped drain that exits cleanly outside is the simplest and most reliable arrangement.
Homes from the 1970s, as many are in Hurst, often had one small central system, so rooms added later commonly lack proper cooling and are good candidates for ductless heads.
Mixing mini-splits with a central system
A common setup keeps the central AC for most of the house and adds a mini-split for one hard-to-reach room. That way the main system keeps working as designed, and the new space gets what it needs without disturbing existing ducts. It also gives you a fallback if either system needs service during a hot week.
Before work starts in Hurst
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Federal rules require EPA 608 certification for technicians who service equipment containing refrigerant, which covers most AC repairs beyond filters and breakers.
For Hurst addresses, Hurst's Building Inspections office handles mechanical permits; a system change-out is permitted work, and the contractor normally pulls the permit.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Companies that take calls here usually also work in Fort Worth, Bedford and North Richland Hills.
Is it less costly than extending ducts?
It depends. For a single room with no duct access, a mini-split is often the more practical choice. For several rooms in a house with open attic space, extending ducts may cost less. Ask for quotes on both before deciding. Whichever way it goes, the best quotes explain the reasoning instead of just giving a total.
What a mini-split install involves
- Site visit and load calculation for the space
- Choice of equipment and head locations
- Mounting the outdoor unit and indoor head
- Drilling the wall opening and running the line set
- Electrical connection, evacuation and startup
Ask the company to confirm each step and to show you how the remote works at the end.
More about Hurst
Calls come in from across Hurst, including around Valentine Oaks, Chisolm Park, North East Mall.
The median Hurst home was built in 1973, so original-era ductwork and equipment replacement are common.
Ductless Mini-Splits questions in Hurst
Can a mini-split heat as well as cool?
Is a mini-split good for a room addition?
Where should the indoor head be placed?
Is a mini-split worth it for one hot room in Hurst?
More AC and heating services in Hurst
Ductless Mini-Splits nearby
Helpful guides
Sources
Last updated: