An AC that runs but does not cool is usually a thermostat setting, a clogged filter, a frozen coil, a tripped breaker or a refrigerant problem, in roughly that order of how easy they are to check. The first four you can look at safely; refrigerant always needs a technician. Call the number on this page to be connected with a local AC company in Roanoke.

Quick reset worth trying
If the display is frozen or the system ignores commands, switch the thermostat to off, wait a couple of minutes, and set it back to cool. This clears a stuck state and gives the compressor time to settle. Do it once. Repeated on and off cycling stresses the compressor and does not solve a real fault.
Return air matters too
People focus on vents blowing out, but the return side matters just as much. A return grille choked with dust, a filter slot that sucks in unfiltered air or a closed door that starves a room of return flow all upset the system. Clear the grille and keep interior doors open while testing.
Permits, power and gas in Roanoke
The Texas Department of Licensing and Regulation issues ACR contractor licenses. A quick license lookup on TDLR's site is worth doing before you sign a proposal.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
Replacement and new installation work can require a permit, and the city's building department is where that's handled for Roanoke addresses.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Nearby, the same kind of help is available in Fort Worth, Trophy Club and Keller.
Frozen coil or just cold air?
| You see | Likely meaning |
|---|---|
| Frost on the copper line | Coil may be freezing |
| Water on the floor | Ice melting or a clogged drain line |
| Weak airflow plus frost | Airflow restriction |
Any of these means switching cooling off before more damage happens in Roanoke, then calling for a technician to find the underlying cause.
Dirty condenser, weak cooling
When grass clippings, leaf litter or cottonwood fluff blanket the outdoor coil, the system cannot release heat and cooling drops off. With the power off, a gentle rinse from the outside can help, but never use a pressure washer or open the panels. Persistent weak cooling after cleaning means a technician should look.
Give the technician your notes
Tell the company what you checked, what you saw and what you heard: the thermostat mode, the filter condition, any ice, whether the outdoor fan spins and how the breaker behaved. A clear story means a faster diagnosis and fewer repeated steps, and it helps the company judge how urgent the call is.
AC Not Cooling questions in Roanoke
Can a dirty filter really stop my AC from cooling?
Is it safe to reset the breaker?
Should I add refrigerant myself?
How long should I wait before calling?
More AC and heating services in Roanoke
AC Not Cooling nearby
Helpful guides
Sources
Last updated: