An AC that runs but does not cool is usually a thermostat setting, a clogged filter, a frozen coil, a tripped breaker or a refrigerant problem, in roughly that order of how easy they are to check. The first four you can look at safely; refrigerant always needs a technician. Call the number on this page to be connected with a local AC company in Benbrook.

Step one: the thermostat
Confirm the thermostat is set to cool, not heat or fan only, and that the target is a few degrees below the room reading. Dead batteries or a blank display can stop the system entirely. A programmable or smart thermostat may also be following a schedule you forgot about, so check for a hold or an away mode.
How a dirty filter causes a no-cool call
The evaporator coil needs a steady flow of warm house air to absorb heat. A clogged filter starves it, the coil gets too cold, and moisture freezes onto it. Then even less air gets through, and the problem feeds itself. That is why a ten-minute filter change can head off a frozen system.
Step three: look for ice
Open the access panel only if it is a simple, tool-free filter door, and look at the copper line near the indoor unit. Frost on the line, ice on the coil or water dripping below usually means the coil has frozen. Switch cooling off and run only the fan to thaw it, then call.
Listen before you call
Sounds help a technician in Benbrook just as anywhere. Humming without starting, a loud buzz, rattling, a high squeal or a click that repeats all tell different stories about the outdoor unit. Stand a safe distance away, listen for a minute, and describe what you hear. Do not open the unit or touch wiring.
Local details for Benbrook
AC and heating contractors in Texas need a TDLR air conditioning and refrigeration contractor license, and the number can be looked up on TDLR's online search before anyone starts.
Federal rules require EPA 608 certification for technicians who service equipment containing refrigerant, which covers most AC repairs beyond filters and breakers.
Benbrook's Building Permits and Inspections office is the office for building and mechanical permits in Benbrook; ask the contractor whether your job needs one.
Oncor delivers electricity in Benbrook and handles outages at 888-313-4747; your bill and plan come from whichever retail provider you signed with.
Nearby, the same kind of help is available in Fort Worth, Aledo and Crowley.
Step five: refrigerant and the compressor
If the thermostat, filter, coil and power all check out and the air is still warm or only slightly cool, the system may be low on refrigerant or have a weak compressor. Refrigerant does not get used up; low charge means a leak. Only a certified technician can find and repair it.
AC Not Cooling questions in Benbrook
Can a dirty filter really stop my AC from cooling?
Will the AC cool down on the hottest days?
How do I check an AC company's credentials?
Could a power outage have caused this?
More AC and heating services in Benbrook
AC Not Cooling nearby
Helpful guides
Sources
Last updated: