Most furnace repairs are small parts, not a whole new furnace. A heating company tests the ignition sequence step by step and tells you what failed before any work starts. Call the number on this page to be connected with a local heating company in Roanoke.

Symptom guide
| What you notice | Where a technician looks first |
|---|---|
| Clicking, no flame | Ignitor and gas valve |
| Flame, then shutoff | Flame sensor |
| Blower never starts | Pressure switch, control board |
| Hot, then off | Limit switch, airflow |
Ignitor trouble
Most modern gas furnaces light with a hot surface ignitor, a fragile element that glows to light the gas. It cracks with age and heat cycles. When it weakens, the furnace clicks, the ignitor may glow dimly or not at all, and the burners never light. Replacing it is one of the more routine furnace repairs.
Permits, power and gas in Roanoke
AC and heating contractors in Texas need a TDLR air conditioning and refrigeration contractor license, and the number can be looked up on TDLR's online search before anyone starts.
Smell gas near the furnace? Get everyone out, call 911 and then Atmos Energy (866-322-8667) once you're outside. Don't flip switches on the way.
the city's building department is the office for building and mechanical permits in Roanoke; ask the contractor whether your job needs one.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Companies that take calls here usually also work in Fort Worth, Trophy Club and Keller.
Why quotes differ between companies
Two independent companies can quote the same furnace differently because they price labor, diagnosis time and parts differently. Some charge a service fee that is applied to the repair if you go ahead. Ask how the diagnosis fee works, and compare quotes for the same described repair.
Test run before they leave
- The furnace completes a full heating cycle.
- The flame looks steady and blue.
- Warm air reaches the registers.
- The thermostat shuts the furnace off when it reaches the setpoint.
Stay for the full cycle if you can.
A yellow flame is worth a call
A healthy gas burner flame is mostly blue. Lazy yellow or orange flames, soot around the burner area or a flame that lifts off the burners can mean poor combustion. Do not keep running a furnace that shows these signs. Turn it off at the thermostat and call a heating company.
Furnace Repair questions in Roanoke
What does a flame sensor do?
My carbon monoxide alarm went off. What do I do?
Can I fix my furnace myself?
How often should a furnace be serviced?
More AC and heating services in Roanoke
Furnace Repair nearby
Sources
Last updated: